Search
  • PH Engine Mobile OE Team

Why Filter Diesel Fuel?


Part 1: Revisiting the Racor Filtration Guides

Diesel engines are equipped from the factory with at least a basic fuel filtration device. However, worldwide diesel fuel quality is in general decline, so these basic forms of filtration cannot fully protect precision engine components. No matter how carefully fuel is handled, contaminants find their way into fuel during transfer, storage or even inside the vehicle's tank. Water, an engine's primary enemy, condenses directly from the air during normal daily heating and cooling cycles. In addition to water, solid and semi-solid particulate and dissolved contamination is common. If these common contaminant challenges weren’t enough, there is also the potential for paraffin wax crystal formation in the fuel during cold weather operation. Paraffin is a natural constituent in #2 diesel fuel and adds significant energy. But when #2 diesel cools to its particular "cloud point", wax crystal formation causes filters to plug just as if they were fouled by other contamination. Each of these threats to smooth engine operation is addressed by a well designed, high quality and effective diesel fuel filter/water separator. The proper filtration system can go a long way to assist operators with required protection and maintenance. Side Note: #1 diesel doesn’t have dissolved wax, and is often blended with #2 diesel to make winter fuel. Next time we will cover details of contamination sources and their damaging effects.

Go to Part 1: Why Filter Diesel Fuel?

Got to Part 2: Water, A Diesel Engine's Worst Enemy

Go to Part 3: Hard and Soft Particle Contamination in Diesel Fuel

Go to Part 4: Cold Weather Diesel Fuel Filtration

Go to Part 4.5: Preventing Cold Weather Diesel Problems

Contact:

Parker Hannifin Corporation

Racor Division

3400 Finch Road

Modesto, CA 95353

800 344 3286 / 209 521 7860

racortech@parker.com

www.racor.com

#technical #filtrationguide #fuel

681 views

© Parker Hannifin Corp 2020