Watch this FBO Fuel Filter/Water Separator Features Video
Don't put dirty fuel in your tank. Get Clean, Dry, Fuel every time using the Racor FBO fuel transfer filter.
Racors FBO assemblies are specifically designed to meet filtration requirements of today’s high-pressure common-rail diesel injection systems. They can be used on mobile refuelers, installed in refueling cabinets, for fuel dispensing pumps, as a primary fuel filter/water separator for large diesel engines, in bulk fuel handling, fuel transfer, or other higher flow applications.
These versatile housings have three filter options to meet various requirements: fuel filter, fuel filter/
water separator, or water absorber. For fuel dispensing applications, a fuel filter/water separator filter is recommended. FBO filter assemblies are designed to meet the toughest hydrocarbon refueling conditions and feature easy cartridge filter change-outs.
FBO assemblies have a flow rate of 10 GPM (38 LPM) to 75 GPM (284 LPM), depending on model, filter, and type of fuel to be filtered. They also feature a “locking ring collar”, which attaches the filter housing to an aluminum die cast filter head with four bolts. A slotted “locking ring collar” allows maintenance personnel to hand loosen four collar bolts, rotate, and lower the bowl assembly for easy filter changeouts. With a new filter installed, simply raise the bowl and rotate into position on the locking ring and hand tighten (evenly torquing the 4 closure bolts to 100 lb-in is highly recommended). The closure hardware consists of stainless steel nuts, bolts, and washers with metal hand knobs for ease of maintenance. No wrenches or other special tools are required, allowing one person to easily change the filter. Note: No V-band clamps are used. Contains Viton® o-rings for compatibility in Biodiesel applications.
Click here to go to the Fuel Dispensing Page